Laser Cut and Etched Enclosure for 70x50mm Circuit Board

by _prry in Workshop > Laser Cutting

2381 Views, 26 Favorites, 0 Comments

Laser Cut and Etched Enclosure for 70x50mm Circuit Board

IMG_1852.JPG
IMG_1800.JPG
IMG_1819.JPG
IMG_1802.JPG
IMG_1814.JPG

Enclosure for 70x50mm circuit boards in internal "cradle". I'm using it to house a Adafruit Huzzah Feather ESP8266 to control some cheap IKEA RGB-Leds.

Just want the box? Sides without the cutouts for the cradle, usb-in and output cables included in the files (Fourth picture).

Some notes:

If you varnish the box you might need to either sand down to make the pieces fit nicely, or add something like 0.5mm to the spaces where the lid and cradles slides together.

One cradle part has cutouts to fit the Huzzah board - This is because I soldered the boards before I thought of to make this box, if don't need that precise fit - which you probably won't - just delete that part and duplicate the other cradle part.

Lasered at #sliperiet #fablab in UmeƄ, Sweden!

https://www.facebook.com/fablabumea/?fref=nf
http://sliperiet.umu.se/sv/fablab

Enjoy and happy lasers!