Laser Cut a Christmas Wall Decoration | Step-by-Step Tutorial

As Christmas draws near, I’m sure many of you are already filling your homes with lights, ornaments, and festive touches. But have you ever looked at a wall and felt that something is still missing?

A laser-cut Christmas wall decoration is a simple way to bring warmth and personality to that empty space. In this tutorial, I’ll walk you through the full process of making a wonderful wall decor, so you can create a decoration that instantly makes your home feel more complete and more Christmassy.

Machine Used

Thunder Bolt 30W

Material Needed

3mm Plywood

Settings

Cutting

1. Speed:10mm/s
2. Max Power:25%
3. Min Power:10%
4. Number of Passes:1

Start by laying your wooden board flat on the laser bed. Make sure the surface is clean and sits evenly without warping. If needed, use magnets or light tape at the edges to keep the board from shifting during cutting.

Open your laser software(I use LaserMaker) and import the Christmas wall decor design file. Adjust the layout so it fits properly within your material size. Before moving on, double-check your engraving and cutting parameters to match the thickness and type of wood you’re using.

Proper focusing ensures neat, polished edges. If your machine has auto focus, use it for quick setup. For manual focusing, lower the laser head with the focus stick until it touches the wood surface at a perfect angle. Always double-check before cutting.

Then click “Frame” or “Border” to preview your cutting area and make sure the design fits nicely on your board. This confirms your material placement and avoids wasting wood. Adjust as necessary. Once everything is set, start the laser job.

Stay close to the machine while it’s running and watch the cutting and engraving progress. Keep an eye out for excessive smoke, small flame-ups, or any movement of the material that could affect the outcome. Make sure your workspace is well-ventilated, and rely on air assist if available to achieve cleaner edges on the wood.

Once all parts are cut, carefully remove them from the laser bed. Paint or stain the decorations. Use thin brushes or paint markers for precision. Allow the color to dry fully before proceeding.

After the paint has dried, assemble the pieces according to the design. Use glue to stick each layer together.

Your Christmas wall decoration is now complete. Hang it on a wall, above a mantel, or near the entrance to instantly bring festive charm into your space.