Laser Cut Woodland Cabin Hut for Terrarium

I like terrariums and wanted to add a cabin into my bottle garden. Attached is the SVG for a laser cut cabin.

An upgraded treehouse version is linked below if you want to do that and it is available on my site.

Access to a laser cutter.

The SVG file

4mm plywood

Sandpaper and wood glue

Some dual tip manga pens

Start by cutting out the parts - engraving the black lines and cutting the red on 4mm plywood.

The SVG file is attached here.

Colour the parts - you can stain or paint but I used dual tip markers in light grey and brown. Do both sides!

The two roof panels will need lightly sanding on the top edge at 45 degrees to connect neatly to the top beam. See picture.

Having done this, glue the parts together using wood glue...

Then place in your terrarium and enjoy...

You can try something a bit more challenging with this next Treehouse version I have been working on...link is on my site here (although this one costs).