Laser Cut Wooden Name Sign

What you need:

• A design idea - I used the Tiny font
• A computer and graphics program to create the pdf
• Wood - I used oak (again)
• Laser cutter - Usually at your local fablab/workerspace

The lines need to be about 0.3mm apart.

The laser I used needed the lines to be 0.02mm thick.

Use ~2.5x the speed (or 40% the power) you'd normally use to cut through the wood.

I used a small screw driver to remove thin pieces of wood inside the letters.

I used oil. I'll mount it on the door with double sided tape.