Laser Cut Squirrel Picnic Table

This guide will help you assemble the inventHQ squirrel picnic table!

Skip this step if you already have the pieces.

This file uses a 12x12in 1/8" piece of birch plywood.

Materials include:

• 1 tabletop
• 2 bench tops
• 2 leg pieces
• 2 zip ties
• Face or back mounting piece
• Mounting bar

Attach the bench top to the leg piece. The easiest way to do this is by hanging the pieces off the edge of a table, so you can hammer the pieces together on a solid surface.

Position the second leg piece, and hammer it down into the other hole on the bench top.

Attach the second bench top. Make sure to align both connecting joints so you can hammer them at the same time.

Attach the tabletop. Make sure to align ALL 4 connecting joints so you can hammer them at the same time.

Great job! Your table is assembled! Now is the time to decorate! You could add paint, stain, or other creative elements!

To assemble the mounting bracket, simply hammer the pieces together like the picture below. The mounting bar (long rectangle) should be snuggly fit into the ‘mouth’ of the face or back piece.

Option 1: Using the mounting bracket. Secure the face piece with a zip tie around a fence, pole, or smaller tree branch. Slide your picnic table onto the mounting bar through either the upper or lower rectangle cutouts on the leg pieces.

Option 2: Balancing the picnic table on a branch.

The table can also be mounted with just the mounting bar (long rectangle) and zip ties pulled through the holes on the mounting bar.