Laser Cut Phone Stand

by alexbollens in Workshop > Laser Cutting

2406 Views, 15 Favorites, 0 Comments

Laser Cut Phone Stand

temp_-1092702653.jpg
temp_-446817337.jpg
temp_-1727983209.jpg
temp_733758059.jpg
temp_-1933059026.jpg
temp_-624710778.jpg
temp_1865014814.jpg
I made a Laser cut phone stand based off of the 90s Pittsburgh Penguins logo

The Stand Itself

temp_15882368.jpg
temp_648575531.jpg
temp_1778019138.jpg
Hello everyone this is my best shot at a cool hockey based cell phone stand that is compatible with the Samsung Galaxy s4 and the iPhone 5 and many other smartphones with a few dimension tweaks here and there. I made the stand based off of the look of the Pittsburgh Penguins logo from the 1990s

How It Works

temp_1615957295.jpg
temp_-951462947.jpg
temp_700276389.jpg
The logo acts as a stand in variable manners as many parts of the piece can act as a stand. For example you can use the tip to stand the phone horizontally or use the flat of the piece to stand the phone up vertically.

Making the Stand

temp_-835476587.jpg
I drew up the stand on the Inventor program and drew it as accurately as I could to the logo. If you want a Penguins logo then this is a good starting point, and this also works as a template for other NHL team logos. Basically all you have to do is draw up your favorite team's logo and tweak the dimensions so it fits your phone