Laser Cut Phone Stand

by nhra4life in Workshop > Laser Cutting

2657 Views, 16 Favorites, 0 Comments

Laser Cut Phone Stand

14, 12:34 PM.jpg
14, 1:08 PM.jpg

Hi, this is a laser cut phone stand or phone holder. My inspiration for this project came from 0xyJin It is designed to hold the iPhone 5 but with a few dimension modifications it can hold many different types of Phones.

How It Works

14, 1:08 PM.jpg

This is how the stand holds the phone. It is at a very optimal viewing angle and works very well. It can hold the phone from both sides in landscape view. It also does not intrude on the phones functions such as the camera or the speaker when placed correctly.

How It Is Put Together

14, 12:34 PM.jpg

The stand consists of two pieces of wood laser cut on opposite sides, then glued together with a simple wood glue. It takes up very little space in the pocket and also when cutting they can be stacked very close together so there is minimal waste.

DXF File

This is my DXF file. I hope you enjoyed this!