Laser Cut Moose Mug



National Lampoon's Christmas Vacation is a classic. One of the favorite scenes is them drinking punch from a moose mug. While these are available from online sources, here is one you can make yourself.
Supplies
1/8 inch Plexiglas (acrylic sheet)
acrylic solvent glue
9 ounce disposable cups
laser cutter/etcher
Cut Out Moose Sections


Use the laser cutter/etcher to cut out the two sections of the moose mug.
Bond Acrylic Pieces Together

Using the acrylic bonding bonding solvent, glue the nose to the antlers at the notches in each section.
Ready to Party


Drop in a disposable 9 ounce cup and you are ready to party. Do not glue the cup to the moose. Hand wash only.