Laser Cut Crate

Here is a guide in how to make a weathered looking wooden crate on a laser cutter. The good thing about it, is that it has a more solid bottom, than most lasercut boxes that use box joints.

Using the lasercutter, cut the parts from the PDF or Illustrator file. Then glue it together.

Clamp it together and then let it set, afterwards it looks like the image om the right.

By burning it with a blowtorch it will get a weathered look, afterwards i lightly sanded away the charred bits.

By coating it with bees wax, the natural colors of the wood really pops. It also makes it feel less drye.

After coating it, i thoroughly cleaned it with a papertowel.