Laser Cut Christmas Tree Ornament
by ThinkbotB in Workshop > Laser Cutting
6036 Views, 62 Favorites, 0 Comments
Laser Cut Christmas Tree Ornament
This is a file to be used to make a laser cut Christmas tree Ornament. It was created in CorelDRAW X6. I made mine on 1/8" thick Masonite. There is no glue on these, perpendicular pieces that provide the structure are very tight to keep them together. The discs just sit where they are from gravity.
If you need to change the gap for a different thickness of material, the support parts of the tree are 10 deg from vertical. I used the laser settings that were provided for that material at the Techshop. Mine were cut in a single pass. I made it at Techshop.
If you need to change the gap for a different thickness of material, the support parts of the tree are 10 deg from vertical. I used the laser settings that were provided for that material at the Techshop. Mine were cut in a single pass. I made it at Techshop.