Laser Cut CD Stack

So here you will find a simple Laser Cut CD Stack

No need for screws or bolts, works entirely on the fact that it is a tight fit!

List of Materials:

1 Laser cutting machine

several 3mm wood sheets

access the svg- feel free to personalize the stacks backboard, just avoid doing anything to the holes.

use the svg file to cut out the shapes

Note: that you'll need top cut 12 shelves and there are only 2 in the file. copy and paste in order to get more shelves.

USE 3mm thick wood

insert the shelves into the back.

its a very tight fit some force is necessary.

fit the two front legs on the other side of the shelves

Congratulations you're done .