Lane Tech Home Automation Projects

This is for when my paraents want to call me to go down stairs. This design an make into a small chair actvation for your dolls. Just minus the picture. And you need to cover it. You can actaully add more but I just did it with two. This instructions for two but if you want do more you can repeat.

• cardboard
• exator knife
• hot glue gun
• glue
• 2 servos
• 2 servo fins
• bread board
• Aragon particle
• two toothpicks.
• pictures
• computer
• android product

The way to do this is use a digram of the sevos and then attach them to right spot.

This is to make sure that there is no other problem later on when you test it. Since this project is going to use something more complicated. This to make sure that the servos work.

So you need to make a webhook. You do the servo fins were you put at and then publish these in the void.

You will need to get ifft on your phone. Make sure that google assitant is on your phone. After that you need to make a new project.

So you first add a if then search up google assitant. Then hit scene to do it. After that do what you need to say. After this whole thing you need to create a then. Then search up webhook. Click on that then add the url you get webhook one than change the method to post and change text/plain.

After this just do this again.

put the servo thing on and then test with saying to google okay google activate the thing you named. If hat doesn't work test it change it.

mesure how long and the width want then cut it two. then after that cut untinl to get paper and cut it were you want to bend. After this cut a another piece of card board. Then after that cut slit cardboard you just had for servos like the first one.

THe wone you foded put about 90 deggrees and then puntures with a tooth pick the cardboard you did unitll the paper.

The next step is to use a hot glue gun to glue the servo fin and the toothpick on the card board.

After this print and glue on the pictures.

put the servo thing on the servo and put the cardboard you put holes on the servo.