Lampshade for Livingroom
Hello Everyone
This little instructable took place at my house
The living room
Build Process #1
Drive to the nearest wood store and buy the desired size and diameter of the Plywood
Cut it the size you want
Make sure the Plywood are smooth and good looking
Cutting
Cut the Plywood you desired size
Gather the Frame
Take the Plywood , and attach it to each other , so you have a nice shape like the one above
Strengthen it with Aluminum angles
Strengthening the Structure
Strengthening the structure
Create the Cube Shape
Attched the two square shapes together so you have a nice cube
Attaching the Outer Cover
Take the outer shell and cut to fit the size of each rib
Take a clear and strong adhesive, and paste the cover on each side of caution
Pasting
Paste the cover frame with adhesive tape
Just to keepmit tight
Wrap the Whole Structure With Wallpaper You Desire
Take a wallpaper the color you want, and cut it to fit the ribs
attached it to the the ribs and make sure you stick it well enough
Cut the excedded wallpaper !
Peal Off the Leftovers
Prepare the Needed Materials for the Lighting Fixture
Lighting Fixture Installation
Lighting Installation is pretty easy.
It needs to be on top of the lampshade , so you only see beneath the lights it self and not the structure
Adding Chains to Hang the Fixture
I used very regular , thin chains to hang it .
Make sure it is tighten securely to the upper base of the fixture
Hanging the Lampshade - Finally
