Lamp: “Kaktus"

by ywang31 in Workshop > Lighting

344 Views, 5 Favorites, 0 Comments

Lamp: “Kaktus"

IMG_6945.JPG

A table night stand inspired by cactus.

Materials:

MDF Board.

Red/Light Gray Spray Paint.

Glue gun

Superglue

Spray Paint Protector.

Different Colors' Small Light bulbs

Electronic Candle.

Ideation

1392629972-1398697300.jpg
lnv5ookgl3i.jpg

The lamp "KAKTUS" mainly inspired by nature plants, the plant inspired me is cactus, I get my color inspiration from the flower of the cactus and the gray tone of the stabs of the cactus.

Materials

Screen Shot 2017-05-08 at 23.38.00.png
Screen Shot 2017-05-08 at 23.37.44.png
Screen Shot 2017-05-08 at 23.37.08.png
Screen Shot 2017-05-08 at 23.36.48.png
Screen Shot 2017-05-08 at 23.36.38.png
Screen Shot 2017-05-08 at 23.36.10.png
Screen Shot 2017-05-08 at 23.35.38.png
hardboard.jpg

-MDF BOARD

-RED/GRAY SPRAY PAINT

-GLUE GUN

-WOODSHOP

-SUPERGLUE

-COLORFUL LIGHT BULBS

-FAKE CANDLE

LASER CUT

IMG_6817.JPG

Preparing laser cut files on AI, then send to the laser cut, after 1-2 days you can get your laser cut board.

Put Parts Together

IMG_6823.JPG
IMG_6822.JPG
IMG_6820.JPG
IMG_6818.JPG

Use glue gun, super glue, wood glue to put ll parts together.

Spray Paint the Light.

IMG_6834.JPG
IMG_6837.JPG
IMG_6836.JPG
IMG_6835.JPG
IMG_6839.JPG

Protect different parts by use paper and tape, use different spray paint color the different parts.

Finish the Spray With Protector

IMG_6844.JPG
IMG_6843.JPG

After spray paint, use the spray protector to add a shine-look for the light.

Finish!

IMG_6942.JPG

The finish look at night.