Lamp and Lighting

by sujistar in Workshop > Lighting

1436 Views, 16 Favorites, 0 Comments

Lamp and Lighting

IMG_20140702_215718.jpg
DSC_0547.JPG

Enjoy this beautiful , easy to make lamp

Materials

IMG_20140627_145251.jpg
IMG_20140627_150224.jpg
IMG_20140627_145406.jpg
IMG_20140627_145316.jpg
IMG_20140627_145341.jpg
IMG_20140627_145351.jpg
IMG_20140627_145656.jpg
IMG_20140627_145433 (1).jpg

All you need is a sharp knife , a cotton wig and few broomsticks.

With the broomstick,

Cut into small pieces of about 5 cm each .

Peel off the upper layer so that you get the inner soft wood and outer cover.

Arranging

IMG_20140627_145829.jpg
IMG_20140627_145751.jpg
IMG_20140627_145930.jpg
IMG_20140627_145433.jpg

Now take the thin splinters and form a weaved mesh as shown.

Now take the soft part as shown and pierce the splinters through it

Making

IMG_20140627_150030.jpg
IMG_20140627_150043.jpg
IMG_20140627_150113.jpg
IMG_20140627_150203.jpg

do as shown in the photos.

Cotton Wig in Place

IMG_20140627_150235.jpg
IMG_20140627_150244.jpg
IMG_20140627_150344.jpg
IMG_20140627_150419.jpg

after arranging the three sides , before putting the fourth one , put the cotton wig in place and the place the fourth piece of the stick.

Display It

IMG_20140630_215510.jpg
IMG_20140702_215718.jpg
DSC_0546.JPG

Take a bowl filled with water till half its brim, add oil to it(any burning oil , olive , mustard , etc) so that the layer of oil is around 1cm thick .

You can use thermocole balls also.

Place the lamp on the layer of oil and burn it :)

Switch off your lights and place it on a table , and enjoy an amazing lamp lit dinner :))