Lamp

by Maria.Fata in Workshop > 3D Printing

8114 Views, 36 Favorites, 0 Comments

Lamp

fata_lampon_1024_768.jpg
fata_maria_lampOn_1024_768_jpg.jpg
fata_maria_lightoff_1024_768_jpg.jpg
fata_lampoff_1024_768.jpg
Table top lamp. It clicks on and off, with 3 light settings.
This lamp was created using 3D design software. It was then 3D printed in Zcorp Plaster.

by: MARIA FATA