LLC V1.5 (+ Instructions) | a K'nex SMG

by That_Jamie_S_Guy in Living > LEGO & K'NEX

856 Views, 4 Favorites, 0 Comments

LLC V1.5 (+ Instructions) | a K'nex SMG

IMG_20160227_144043960.jpg

Hello! I am back with some improvements to my recently posted gun, Linkin's Lightning Carbine! I realized there was a lot to be improved in the gun, especially the stock. Before, the gun shot very inconsistently. With a couple of internal modifications I managed to fix this. Here is a list of my improvements:

  • The stock is smaller, and a nicer shape.
  • The barrel after the magazine is 3 layers wide, so the bullet has less friction.
  • The barrel extends slightly out of the gun. This is mainly aesthetic however it slightly increases the accuracy.
  • The top attachment rail is 2 parallel rails, not one center rail.
  • There is a mag lock that hardly works, but it pushes the magazine out instead of locking it, so it is more of a fast way to release the magazine.

The stats are roughly the same, maybe the range has increased a lot but everything else is the same. I included The Red Book Of Westmarch's grip (slightly modified) and red dot sight on the gun. Here is a link to the instructions for those attachments.

A Closer View

IMG_20160227_144043960.jpg
IMG_20160227_144128252.jpg
IMG_20160227_144209375.jpg
IMG_20160227_144247433.jpg
IMG_20160227_144428776.jpg
IMG_20160227_144457167.jpg
IMG_20160227_144503222.jpg
IMG_20160227_144510964.jpg
IMG_20160227_144516906.jpg
IMG_20160227_144523347.jpg
IMG_20160227_144529153.jpg
IMG_20160227_144540904.jpg
IMG_20160227_144611498.jpg

Here are some closer up pictures of the gun.

Layered Pictures

IMG_20160227_145031789.jpg
IMG_20160227_145048314.jpg
IMG_20160227_150151343.jpg
IMG_20160227_150709416.jpg
IMG_20160227_150822976.jpg
IMG_20160227_150830070.jpg
IMG_20160227_150836276.jpg
IMG_20160227_151747150.jpg
IMG_20160227_150842493.jpg
IMG_20160227_151550570.jpg
IMG_20160227_151905508.jpg
IMG_20160227_152200274.jpg
IMG_20160227_152217978.jpg
IMG_20160227_152224984.jpg
IMG_20160227_152232370.jpg
IMG_20160227_152952591.jpg
IMG_20160227_153005798.jpg
IMG_20160227_153136023.jpg
IMG_20160227_153149590.jpg
IMG_20160227_153155795.jpg
IMG_20160227_153201239.jpg
IMG_20160227_153206848.jpg
IMG_20160227_153213019.jpg
IMG_20160227_154027288.jpg
IMG_20160227_154154637.jpg
IMG_20160227_154231688.jpg

I did make layered instructions, however my laptop decided it was a great idea to crash! So, instead I will show you the layers here. If you desperately want to build the gun, it really wouldn't be hard to copy from these pictures. Sorry! All broken pieces are mandatory, however I suspect the broken rod used in the trigger mechanism could be a full rod, and the next layer could easily be modified. Anyway, good luck building it!