LG 37'' LCD TV Board Swap

by mantis22 in Circuits > Electronics

2632 Views, 11 Favorites, 0 Comments

LG 37'' LCD TV Board Swap

temp_318470317.jpg


Tools I Used

temp_601150201.jpg
temp_1735868296.jpg
temp_1457480827.jpg
temp_-1459613049.jpg
temp_-68338601.jpg

A skinny phillips screw driver,padded envelops,two magnets,multimeter

Lay Tv on Flat Surface,Remove Back Panel

temp_1718535983.jpg
temp_1056476715.jpg
temp_797221066.jpg
temp_-573547320.jpg
temp_566433023.jpg
temp_1247666270.jpg
temp_859560255.jpg
temp_1417670565.jpg

Lay pads down first then turn TV screen side down on them. Now remove all the screws approx. 20 of them,use magnets to fish out deep ones

Remove the stand as well

Check for a Noticeable Problem

temp_-1150082806.jpg
temp_-564791965.jpg

Look over the main board for burnt areas and for swollen capacitors... The most common problem

Disconnect Board Wires

temp_408752447.jpg
temp_1139928599.jpg
temp_-1453418550.jpg
temp_2118205490.jpg
temp_-615866167.jpg

Pull the plugs on the main control board

Get New Board or Capacitors....

temp_-1654104757.jpg
temp_-1550133898.jpg

Had a TV with the same board so I just swapped the whole board

Put Back to Geather

temp_-264206948.jpg
temp_642071745.jpg
temp_-1728919543.jpg
temp_1296853076.jpg
temp_1407446221.jpg
temp_914182807.jpg

Plug all your hookups back into the new or used board

Test It Out

temp_1765712647.jpg

works great