LEGO Tire Headphones Organizer

An easy to make headphone/earbuds wire organizer. This is actually an idea that hit me when I saw btru's Sculpey Clay headphone cord organizer, but in this, we are going to make it out of flexible, rubber LEGO tires.

You will need 3 LEGO tires. I found it best to use Standard-axle Large size. The small, thick ones in other words.

Just super glue and scissors is all.

You need to make the final product to be peanut shaped. So, cut chunks off of two of the tires so each has a little less than 3/4 circle left. Next, cut the 3rd tire into two 1/3 or 1/4 chunks. You should have these.

Glue so the ends all fuse smoothly together and make a shape similar to this.

These are two different ones that I've made as not-so-prototypes. This should fit any size of headphones unless they are full wrap around buds.

If you don't want to butcher your tires, try this design. This is just two tires with holes poked through the sides, and a plastic rod in between them and in the sides. Still suggest super glue.