LEGO CAR CREATIONS 2

Hi everybody! I am Density and I am 14 years old. I am a big fan of instructables and Lego so this time I will show you how to make Lego cars. You do not have to use the exact same pieces. Some might be hard to find. If you do not have the required pieces, substitute them for other pieces that can replace the missing ones. You can also change the colour of the pieces. This is a simple design and the cars you make can be made into a collection. I suggest you read through the instructables before you begin so you can see what pieces you need and which ones can be replaced. You can add things on the car to make it look cooler. I hope the instructions are simple and easy to understand. Enjoy and have fun.

These are the parts needed:

- X2  1X4 W. BOW BRICKS
- X5  1X1X2/3 ROOF TILES
- X6  1X1 ROUND PLATES
- X4  1/3 W. BOW BRICKS
- X1  4X4 PLATE
- X1  2X6 PLATE
- X1  1X2 PLATE
- X1  2X3 PLATE
- X1  1X2/1X4 ANGLED PLATE
- X1  1X2 RADIATER GRILL
- X1  1X2 1 KNOB PLATE
- X2  2X2 BEARING ELEMENTS
- X1  1X4 FLAT TILE
- X1  2X4 PLATE
- X4  TIRES
- X1  1X4 PLATE

Place 4 of the 1X1 ROUND PLATES on each corner of the 4X4 PLATE.

Add the 2X6 PLATE on the 4X4 PLATE so that it sticks out evenly on both sides.

Put the BEARING ELEMENTS under the sticking out part of the 2X6 PLATE.

Add the 1/3 W. BOW BRICKS on both sides of the 4X4 PLATE.

This is what it would look like so far.

Take the 1X2/1X4 ANGLED PLATE and put 2 1X1 ROUND PLATES on the outer side of it (The 1x4 side).
Add 2 ROOF TILES between the ROUND PLATES.
Place the ANGLED PLATE on the back of the car (On the sticking out part of the bearing element).

Add the 1X4 W. BOW BRICKS on the car so it goes over the BEARING ELEMENT and some of the 2X6 PLATE.

Put the 2X4 PLATE on the 2X6 PLATE.

Add 2 1/3 W. BOW BRICKS on the car so it goes over some of the 2X4 PLATE.

Add the 2X3 PLATE on the 2X4 PLATE.

Put the RADIATER GRILL on the 2X3 PLATE.
Then add the 1 KNOB PLATE next to the RADIATER GRILL.

Place a 1X2 PLATE on top of the 2X3 PLATE and next to the 1 KNOB PLATE.

Put the 1X4 FLAT TILE on the 1X2 PLATE.

Add the ROOF TILE on the 1 KNOB PLATE.

Take the 1X4 PLATE and put 2 ROOF TILES on the outer sides (image 1).
Place the 1X4 PLATE under the 1X4 W. BOW BRICKS (image 2).

Add the tires.

This is the finished car design. Thank you for taking time out to check out my Lego car creations. I hope it was easy to understand and that it was fun. Use your imagination to make the car look better. There will be more designs coming soon. Please comment on what you think and how I can improve it. Also, please check out my Lego USB at:
https://www.instructables.com/id/LEGO-USB-2/
and my star wars Lego at:
https://www.instructables.com/id/LEGO-STAR-WARS-AT-ST/
and my first Lego car creation at:
https://www.instructables.com/id/LEGO-CAR-CREATIONS/

Thank you very much and enjoy.