LED Using a Voltage Regulator

by Pratheesha in Circuits > Arduino

551 Views, 0 Favorites, 0 Comments

LED Using a Voltage Regulator

3rd Breadboard.png
3rd battery.png
3rd voltage regulator.png
3rd resistor.png
3rd led.png

Hi Guys
Today I am gonna show you guys how to make an LED glow using a Voltage Regulator
So let's get started


NOTE
Voltage Regulator is also called 7805

Components Required
1.Breadboard
2.9V Battery
3.Voltage Regulator / 7805
4.Resistor
5.LED

Connections

3rd circuit.png

Give the connections as given in the figure

Simulation

3rd circuit simulation.png

Click on the START SIMULATION button and you will see the LED glowing as shown in the above image