DYI LED Underglow for Stereo Recievers
by bradAM15 in Circuits > LEDs
285 Views, 0 Favorites, 0 Comments
DYI LED Underglow for Stereo Recievers
This is a great look for a receiver it adds a great techy type of decoration to your stereo
Materials
you will need 4 light strips/bars about a foot long (i used ikea dioders)
a power supply and controller for the light strips/bars (ikea dioders include power supply and controller)
a stereo reciever with feet approx. an inch in hight (i owned a yamaha RS-202BL)
glue dots
OPTIONAL
tape
and 1 small zip tie at least 3 inches in length
Stick Glue Dots to the Ends of the Tops of the Light Bars
Press 3 of the 4 of the Light Bars Face Up As Shown in These Spots on the Bottom of the Reciever
Press the 4th Bar Down As Shown
(i have hooked the last one to the one closest to it to reduce cord usage and save some space)