LED Strip in Kitchen!

one of the ways to make your kitchen better is to use led strip under your cabinets,but how?so follow until you done it.

as you can see in the pictures you will need:

LED strip(step 2)

2 12v3A power adapter with connector

2 20k ohm potantiometer with knob

2 2n3054 or 2n3055 NPN transistor

2 1k ohm resistor

2 'L' bracket

Tools you will need are:

drill

skrewdriver

solder

heat shrink tubing

you should calculate how much Led strip you need (mine is about 9 meters)

cut them as the size of your cabinets and solder them in series(you can't solder after sticking so make sure that everything works well).

your cabinets most be clean and dry so it's better to clean them.

connect your power adapter to the strips.

if they work well go to the next step.

as you can see in the chematic the dimmer circuit is very easy to make so follow next steps to do it!

solder one end of the resistor to center input of the pot and solder about 60cm of wire to the resistor and the right output of the pot.

skrew the bracket in place and skrey the pot.

drill a 10mm hole in one of your cabinets(where you want to put the dimmer and the adapter).

and then connect the transistor as the chematic in step5

now connect the adapter and test the dimmer you will have something like the video!

thank you!