LED Plastic Cup Lantern

An LED lantern for Halloween made with a plastic cup.

https://www.amazon.com/dp/B08GSMS6H2?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

https://www.amazon.com/dp/B06XKT3QZF?ref=ppx_yo2ov_dt_b_fed_asin_title

https://www.amazon.com/dp/B0DDKNVWBZ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

https://www.amazon.com/dp/B0B4NM2Y4Y?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

https://www.amazon.com/dp/B084HLPN14?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Put battery into holder.

Connect battery holder wires to connector.

Thread LED wires through bottom of cup, so LED light remains inside while the wires come out the top.

Attach the LED wires to the other side of the connector. Black should go with white, colored should go with colored.

Attach the connector and battery to the top with double sided sticky dots. Be sure they sit in the center to keep the lantern balanced.

Add hole punches at the bottom for decoration. Add a Halloween face with permanent marker. Turn on your battery switch!