LED Lighting Plant Stand

I made a LED lighting plant stand that faded between 3 colors (Red, Blue, Green) via Arduino with code

 4 x 8 board in thicknesses of 3/4 of an inch

Black Spray paint

Wood Glue

Clamps

Table saw

Circler saw

Screws

Drills

LEDs lights

Arduino

Battery pack

1) Find a 4 x 8 board in thicknesses of 3/4 of an inch

2) Trace your sketch on the board, two hexagons, and 18 legs

3) Use the Circler saw to cut out the two hexagons

4) Use the table saw to cut the legs perfectly

5) Wood glue three of them together and then clamp (wait a day to remove the clamp

6) Used screws to attach the legs to the hexagon

7) Go outside and spray paint it black (wait a day for it to dry)

8) Add the LED strips and the Arduino