LED Light
Hello today I am going to show you how to make an LED light that can be turned on and off with a switch.
Connecting the 9v Connector to the Battery
First you are going to need to connect the connector to the battery.
Connecting the Wire to the Switch
Next you are going to take your wire and connect it to the middle circle
Connecting the Red Wire From the Battery to the Switch.
In this step you are going to connect the red wire from the 9v battery to the switch.
Connecting the Wires to the LED
Connecting the black wire from the 9v battery and the red wire from the switch to the LED.
Finished Product
This is the finished product when you turn the switch on it should light up.