LED Headphone Jack Tester
LED Headphone Jack Tester
I repair electronics everyday where I work, mainly tablets (iPads) but it ranges from laptops to phones. As a technician I make sure to test every part of a unit that I'm working on to make sure it’s in 100% working condition. When I first started we used regular headphones to check the headphone jack, which is fine but the wires always get tangled and having to take earbuds in and out all day was irritating. So I decided to make a headphone jack tester.
-------Picture with the headphones and the 3.5mm jack-------
This basic headphone jack tester worked just fine. Simply plug in and play some kind of sound out of the unit, if you hear the sound it works. Very Basic, but saves time and works very well.
I came to realize that there is a flaw in this design though. You can hear the sound but what if one side doesn't work? For example: typically on the iPads the right headphone side would stop working requiring a the headphone jack to be replaced. So I decided to try and figure out a way to make it where there is a visual and audible way to know that both the right and left sides of the headphone jack works. I came across a few schematics for LED music synced circuits, and thats where I came up with the LED Headphone Jack Tester.
------Picture of circuit I built-------
I'm not sure how well this circuit works being that i'm not a electronics technician, I just like making things, tearing stuff apart and putting it back together, I just made this with a basic understanding of electronic and some research. I have not made this circuit yet but will try to make a prototype soon. I'm wanting it to be small and not to bulky, I made a simple drawing of what the prototype would look like based off of the simple one I have already made.
------Picture of the simple drawing-------
What I would like to know and the main reason I am posting this on here is to see if there would be a market for this tester? And would the circuit I made work? I know from my experience in the electronic repair business it comes in very handy, but to some it might just be too complicated for something as simple as testing a headphone jack using headphones instead of this tester.
Any input whether bad or good would be greatly appreciated. Thanks for taking the time to read this.
I repair electronics everyday where I work, mainly tablets (iPads) but it ranges from laptops to phones. As a technician I make sure to test every part of a unit that I'm working on to make sure it’s in 100% working condition. When I first started we used regular headphones to check the headphone jack, which is fine but the wires always get tangled and having to take earbuds in and out all day was irritating. So I decided to make a headphone jack tester.
-------Picture with the headphones and the 3.5mm jack-------
This basic headphone jack tester worked just fine. Simply plug in and play some kind of sound out of the unit, if you hear the sound it works. Very Basic, but saves time and works very well.
I came to realize that there is a flaw in this design though. You can hear the sound but what if one side doesn't work? For example: typically on the iPads the right headphone side would stop working requiring a the headphone jack to be replaced. So I decided to try and figure out a way to make it where there is a visual and audible way to know that both the right and left sides of the headphone jack works. I came across a few schematics for LED music synced circuits, and thats where I came up with the LED Headphone Jack Tester.
------Picture of circuit I built-------
I'm not sure how well this circuit works being that i'm not a electronics technician, I just like making things, tearing stuff apart and putting it back together, I just made this with a basic understanding of electronic and some research. I have not made this circuit yet but will try to make a prototype soon. I'm wanting it to be small and not to bulky, I made a simple drawing of what the prototype would look like based off of the simple one I have already made.
------Picture of the simple drawing-------
What I would like to know and the main reason I am posting this on here is to see if there would be a market for this tester? And would the circuit I made work? I know from my experience in the electronic repair business it comes in very handy, but to some it might just be too complicated for something as simple as testing a headphone jack using headphones instead of this tester.
Any input whether bad or good would be greatly appreciated. Thanks for taking the time to read this.