LED Glow Mushrooms
Here is a magical mushroom farm you can create! Made with some polymer clay and LED lights from a craft store. These make wonderful gifts for just under a dollar, and something funny to put in your neighbor's yard or a friend's houseplant. These are simple to make and quite a conversation starter...
INGREDIENTS
Polymer Clay, I used Translucent Polymer Clay
LED lights, I used Celebration LED Balloon Lights OR Dollar Store Keychain LED lights
Super Glue
Knife
Toaster-oven or oven
Optional
Glow-in-the-dark paint and brush
Suncatcher paint
Glossy Protective paint
Note: Remember MOST craft stores will accept printable competitor's coupons, such as a 50% Michael's Coupons.
Click Next to see Instructions!!!
INGREDIENTS
Polymer Clay, I used Translucent Polymer Clay
LED lights, I used Celebration LED Balloon Lights OR Dollar Store Keychain LED lights
Super Glue
Knife
Toaster-oven or oven
Optional
Glow-in-the-dark paint and brush
Suncatcher paint
Glossy Protective paint
Note: Remember MOST craft stores will accept printable competitor's coupons, such as a 50% Michael's Coupons.
Click Next to see Instructions!!!
Forming the Mushroom
Step One
Decide what kind of LED light you will use. The Celebration Lights from a craft store needed to have the balloon tie trimmed off. Photo below.
Form a cap or top of mushroom. Roll out Polymer clay to 1/4 inch thickness and wrap around LED to form stem of mushroom. You can also make smaller mushrooms to form clumps of mushrooms. See detailed photos below.
Decide what kind of LED light you will use. The Celebration Lights from a craft store needed to have the balloon tie trimmed off. Photo below.
Form a cap or top of mushroom. Roll out Polymer clay to 1/4 inch thickness and wrap around LED to form stem of mushroom. You can also make smaller mushrooms to form clumps of mushrooms. See detailed photos below.
Baking
Step Two
Read your Polymer clay's instructions for baking. Remove the LED light before baking!!!
Read your Polymer clay's instructions for baking. Remove the LED light before baking!!!
Assemble
Step Three
Assemble your mushroom and glue it together. See detailed photos.
Assemble your mushroom and glue it together. See detailed photos.
Decorate
Step Five
Optional step-paint or the entire mushroom with Glow paint. If you want colored mushrooms paint your caps with the paint you get with a sun-catcher kit.
Optional step-paint or the entire mushroom with Glow paint. If you want colored mushrooms paint your caps with the paint you get with a sun-catcher kit.
GLOW
Step Six
Insert LED light.
LET IT GLOW!!!!
Insert LED light.
LET IT GLOW!!!!