LED Generator
![IMG-9663.jpg](/proxy/?url=https://content.instructables.com/FI6/WD56/KPFHB9NN/FI6WD56KPFHB9NN.jpg&filename=IMG-9663.jpg)
A small simple design to light up an LED.
Step 1
![IMG-9660.jpg](/proxy/?url=https://content.instructables.com/FOB/VL39/KPFHB9NG/FOBVL39KPFHB9NG.jpg&filename=IMG-9660.jpg)
Put a small, skinny, hollow object on the end of the generator. Make sure that it has a snug fit.
Step 2
![IMG-9661.jpg](/proxy/?url=https://content.instructables.com/F70/6WBZ/KPFHB9NI/F706WBZKPFHB9NI.jpg&filename=IMG-9661.jpg)
Add two wheels onto the hallow stick. Secure the wheels and the added handle with tape.
Step 3
![IMG-9662.jpg](/proxy/?url=https://content.instructables.com/FRF/91C3/KPFHB9NJ/FRF91C3KPFHB9NJ.jpg&filename=IMG-9662.jpg)
Make sure that the wheels are secured on the other end by adding some type of wall on the stick.
Step 4
![IMG-9663.jpg](/proxy/?url=https://content.instructables.com/FI6/WD56/KPFHB9NN/FI6WD56KPFHB9NN.jpg&filename=IMG-9663.jpg)
Add another object on the stick to ensure that the wheels have a tight fit. Use the handle to spin the stick and light the LED.