LCD V2 Case for PrintrBot Simple
by DukeP in Workshop > Laser Cutting
698 Views, 10 Favorites, 0 Comments
LCD V2 Case for PrintrBot Simple
A simpel case for the LCD v2 from Printrbot.
The case fits the adjustable knob to the lower right of the SD-card entrance.
The two cables can be fitted and removed after the case have been assembled and the brightness and contrast can be adjusted.
The drawings match 3mm acrylic. If cut in wood pay attention to the small tolerances.
Assembly and Plans
The case is a snug fit; if using acrylic cement, have vices ready before applying the cement - otherwise the solvent may evaporate before all parts are fitted.
Drawings in adobe illustrator and .png format. If other formats are requested in comments, I will upload them if possible.