Knex Highpower Sniper Rifle

This is HORRIBLE INSTRUCTABLE that shows (somewhat) how to make my first sniper rifle.

This is how to build the trigger area of the gun. RATE!!!!!! Do it Now! ^Thanks! ------>

The problem is that i did not have enough knex to build 2, so this is a thinner and shhorter version, fill it all the way up with pieces.4 on each side of the middle.

the red rod on the trigger is so you can connect to a remote control car wheel to set up into TURRET mode.

the tan lock in pic 2 is so the trigger can be pulled in TURRET mode.

Just build at least 2 plates EXACTLY like this, 7 if want FULL POWER!!!!

The plate where the tan lock is the same, without the yellow connector so build another one of those plates!

see the two red rods? see the orange connector and black y connector? build 4 on one side and 5 on the other. Can use yellow connectors if nessacery, ( i did on my strong one.)

barrel. dont focus on the bits yet, just the orange and grey connector near the top.

final look.

This is how to build the barrel, build as long as your rubberbands stretch.



Notice the 3 oranges instead of 2 with 2 yellows, that is how you end it.

You can build the stock from these pics.

Well, you better be able too!!!!!

YOU ARE DONE!!!!

^{sorry for the HORRIBLE instructable!}