Knex RailBow Rifle V1.7

Here are the instructions for a smaller yet more powerful version of my sniper, the RailBow Rifle.

Piece List

Rods
Gray - 7
Red - 11
Yellow - 10
Blue - 48
White - 78
Green - 162

Connectors
White - 17
Yellow - 150
Green - 15
Red - 70
Orange - 40
Cut orange or dark grey - 5
Light Grey - 3
Dark Grey - 13

Other
Grey Spacers - 60
Blue Spacers - 61
Y-Clips - 4
Tan End Caps - 6
Blue End Caps - 18 (14 can be tan)
Very Small Wheels - 10
Rubber Bands - 5-13

Bow Reinforcement

1:Make
2:Make
3:Make
4:Connect
5:Connect

Mag and Barrel

1:Make
2:Connect
3:Make
4:Different View
5:Connect

Power Transfer

1:Make
2:Connect
3:Connect
4:Make
5:Connect
6:Connect
7:Connect
8:Make
9:Connect
10:Connect
11:Make
12:Add
13:Add
14:Add

Body

1:Make
2:Make
3:Make
4:Make
5:Connect
6:Make
7:Connect
8:Make
9:Different View
10:Connect
11:Make
12:Make
13:Connect
14:Make
15:Make
16:Connect
17:Add
18:Add

Firing Pin, Front Hand Grip, Scope, and Trigger

1:Firing Pin
2:Different View
3:Front Hand Grip
4:Scope
5:Make
6:Make
7:Connect

Bow

1:Make Two
2:Make Two
3:Connect
4:Connect

Assembly

1:Bow Reinforcement + Mag and Barrel
2:Connection
3:Mag and Barrel + Bow + Bow Reinforcement
4:Connect
5:Power Transfer + Bow
6:Connect
7:Power Transfer + Body
8:Connect
9:Trigger + Body
10:Front Hand Grip + Body
11:Scope + Body

Rubber Bands and How to Use

1:You need 1-3 chains of 4 rubber bands and one normal rubber band.
2:Firing Pin rubber bands.
3:Trigger rubber band
4:Pull Firing Pin back until it locks into the trigger.
5:Pull power transfer back.
6:Pull Trigger.
Done!