Knex Mecha IPhone / IPod Touch Stand

An Mecha-Walker-Like iPhone/iPod Touch Stand made of Knex.

Using a yellow rod, a blue rod and a yellow and a red connector make a leg element like seen in the picture. This is the basic support of the structure.

Repeat last step 3 times and join the first three with a yellow rod.
Insert an yellow rod on the opposite side of the "central" connector of the leg elements so it gets a chicken feet like appearance.

Build a blue star and stick a pair of parallel rods so it looks like the picture.

Insert the star between the leg element left alone and the first of the three inner leg elements

Stick a yellow rod between the bottom connectors and add a pink and a gray stopper to add stability between each element.

Join both legs, first with an red rod, then with two white rods and a white connector. Try to separate each leg as much as possible.

This is a minimal iPhone holder, it can be used as an stand alone holder, or as a part of the Mecha stand. Notice how the frame isn't rectangular, but a little triangular so it can support other devices and fit tightly to the rest of the stand.

Add the holder to the rest of the stand structure like seen on the picture. The holder sticks to the red connector between both legs. It's important to adjust the height of the stars so the iPhone stands at the needed height.