K'nex Small Truck

It's holiday!

I now have all the time to instructions, so the next few weeks I will be posting many k'nex construction works. Within a few weeks I post my first balmachine.

But now, I present one of my first k'nex creations! It is a small truck. You can carry stuff, and the back of the truck there may be easy on and off. The doors can open.

This truck I have as my profile picture, but I have adjusted it a bit. This is stronger and more convenient to use.

Good luck!

.

.

Contests

Please vote for Toy rods and connectors contest!

Please vote for wheel contest!

We're going to count! There is a lot of wheels in this truck, I have no idea why:)

RODS: ( 485 )

• Green:286
• White: 184
• Blue: 10
• Yellow: 2
• Red: 3

CONNECTORS: ( 275 )

• Dark grey: 22
• Red: 16
• Green: 2
• Yellow: 58
• Purple (3D): 102
• Blue (3D): 56
• White: 19

OTHER: ( 105 )

• Blue spacer: 43
• Grey spacer: 19
• Y-Clip: 9
• Blue Clip:14
• Black cap: 3
• Yellow cap: 2 (for headlight)
• Red cap: 2 (for rear light)
• Wheel (with tire): 19

TOTAL: 865

Now create the first part of the bottom.

It is very strong, so I have therefore not everything taken apart. Look carefully at the pictures. If you want more pictures, please let know via the comments.

Now create the bottom all the way off!

Good luck :)

Setting the chairs can be tricky.

Now we are going to the back so that the truck can be.

We are now going to make the truck.

Please note that you put between the clamp truck yellow bars. (see last 2 pictures)

The last step!

Create using the y-clips the lamps, and make them fasten in the front and back!