K'nex Ballmachine Motorized Madness Circle Lift.

Welcome to my first instruction Ible! Its about my new lift the ''motorized madness circle lift''. You may think ''why that name''. Well I'm very bad whit name's and since the green half circle is made whit the green track from the track from the motorized madness ballmachine. I decided to give it that name.
Also I know this instruction is kinda badish. But I lost pictures because some pictures didn't wanted to upload. 

Please note that this lift might not work whit the original style balls. The balls would probaly be to smal. I'm not sure because I don't have any original style balls.
EDIT: It works whit the newer style balls when you replace the grey one way connectors on the ball pusher whit orange two way connectors. Thanks to sandroknexmaster

RODS(from small to big and original collors):
Green:54
White:4
Bleu:46
Yellow:26
Red:25
Grey:5
Flexie rods: 6
CONNECTORS:
One-way:15
Two-way:0
Two-way straight:8
three-way:54
four-way:2
Five-way:16
Eight-way:13
Four way 3D:38
Seven way 3D:6
Other parts:
Tan clips:6
Y-clips:10
Bleu spacers; 2
Grey spacers:2
Green motorized madness  ballmachine track:12
Motor:1
And at least one ballmachine ball
Now You have gathered all your pieces lets start!

Here whe make the green half circle. Read all the image note's!

Here you will be making the main structure. Read all image note's!

Here you make the ''ball pusher'' and the axle. Read all image note's!

Here you are putting it all together. Read all image note's!

Almost done! Here you make the entrance and he exit path. Read all image note's!

You have just finnished this lift! Yay! Show me a picture when you made it and I will add it to here!