Knex Vertical Micro Chain Lift - Ping Pong Balls

THIS A PROJECT MADE BY ME AND PARSHAN

Part List :

red connector - 2

Yellow connector -69

grey 3D connector - 55

blue 3D connector - 19

micro chain - 145

white connector - 12

green connector - 6

orange connector - 43

2way grey - 16

micro purple per unit - 2

micro grey 4way per unit - 1

micro yellow rods per unit - 2

blue rods - 44

red rods - 48

green flexi rods - 4

grey rods - 19

green rods - 86

white rods - 4

yellow rods - 44

Y clips - 17

Tangelas (knex clip with angled 3D orange) - 2

blue tips - 2

units - 3

grey spacers - 25

blue spacers - 5

locks - 2

There are twenty-nine units in this, one of them has a red rod instead of a blue one.

This is the track on which the ball will travel.

This is the bottom of the lift. Make sure you are right in the spacing of the wheels.

This is a small step. this is for the ball to glide till the lift. Make sure you bend the green flexi as shown in the picture.

This will take some elbow grease :D

Fix the lower body to middle body.

Assemble this and attach to the main body.

This is to avoid the ball to go off the track.

We will fix the Rail to the main body and a minor thing.

Make this micro chain and fix this in the main body.

NOTE : Be sure how you put the chain (in which manner and direction) use help of the last picture of this step.

So we are done with the assembly ! Now time to use this in your projects:D

(Sending Some more pics for help)