Knex Train With Instructions

This was a train that I made in about a day or so. This was really fun to play with and I think my brother liked it a lot. Now I will gift you with the instructions for this train. Use them Wisely :). Bring on the Pros And Cons!!!!!!

PROS
Looks awesome
Fun to play with
Easy to mod to make it bigger or smaller (I don’t think you would like it then though XD)
CONS
The connecting mech is not very strong, if you pull one of the parts up or dowm by a big amount, then it will break off the section
The pieces needed for the mech are rare for some people.

Now lets build this train

And remember, Please leave a comment and subscribe!!!!!

This is the front part where all of the other sections connect to. I am sure that you will be able to build this by looking at the pictures because I made it ver simple.

This is the part in the middle, both the front and back sections connect to. It has 2 connection portions one on the front and another in the back. I hope that you can make this with the 5 pictures........ Because thats all I have.

This is the last part of the train. And reminder the entire this is filled in. Only the portion where the ball socket is 2 layers all the others are 3 layers. Look at the pictures to see what I mean.

There is two mod that I have in mind for you
Mod number 1 is that you can make the middle section multiple times. (To do this make sure that the ball sockets are connectable)

And mod number 2 is that you can change the ball socket connecters into hinges with y-clips on them. That would probably work a bit better.

Thank you all for watching and have a good day.
Remember to Subscribe and leave a comment below in the comment section!!!