Knex Tiny Coat Hanger
This coat hanger is small and made out of K’nex. It is fairly simple and quite easy to build. Also, it does not require a lot of parts. You can hang it on almost every door, and then hang your coat or jacket on it.
If your door is wider than the one in the picture, you may have to adjust it, but it is not hard.
I really appreciate your vote for me in the Tiny Speed Challenge!
Part List
To build this small coat hanger, you will need:
Connectors:
-One light gray(two slotted)
-One green(four slotted)
-Two red(three slotted)
Rods:
-One white
-Two blue
-Two green
It shouldn’t be hard to get these few pieces together...
Build
Just follow the pictures, and you should be fine. If you have any questions on how to build this just ask me in the comments!
Finished!
Congratulations! You have just finished building an amazing, compact, and fully functional K’nex coat hanger!