K'nex SpaceX Falcon 9 Block 5 Rocket Stages 1 and 2

by s0200311 in Living > LEGO & K'NEX

685 Views, 0 Favorites, 0 Comments

K'nex SpaceX Falcon 9 Block 5 Rocket Stages 1 and 2

IMG_20210616_081357199.jpg
IMG_20210616_074045417.jpg
IMG_20210616_081406070.jpg
IMG_20210616_081317800.jpg

Hello everyone,

Here are the first and second stages of the K'nex Falcon 9 Block 5 rocket!

Here are different payloads you can build from my other instructables:

SpaceX Crew Dragon 2 Capsule: Here.

This is in approximately 1:25 scale.

Parts Needed

IMG_20210604_160758130.jpg
IMG_20210616_081654391.jpg

This is a list of all of the parts needed for this build. Feel free to skip this.

RODS, largest to smallest:

1 grey rod

4 grey yellow length rods

73 white rods

26 black white length rods

4 black green length rods

CONNECTORS, largest to smallest:

36 white 8-point connectors

1 black 8-point connector

5 black 7-point snap-on connectors

-------(You could probably use 8-point black connectors, but it might have trouble attaching to the launch tower that we will build in a later 'ible.)--------

1 metallic blue 7-point snap-on connector

1 grey 4-point snap-on connector

4 grey 3-point connectors

4 grey 1-point connectors

CLIPS:

22 black Y-clips

4 ball clips

8 socket clips

1 metallic blue clip

1 tan interlocking clip

ETC:

18 grey blue-width spacers

9 black cap clips

Landing Legs and Engines

IMG_20210604_161034067.jpg
IMG_20210604_161324495_HDR.jpg
IMG_20210604_161440916_HDR.jpg
IMG_20210604_161513907.jpg
IMG_20210604_161640151.jpg

These are tricky. Putting them together is an art. They don't actually work, sadly, but they look pretty accurate! I hope to modify this instructable to make them work someday.

Stage 1

IMG_20210604_161830713.jpg
IMG_20210604_161937570.jpg
IMG_20210604_162116830.jpg
IMG_20210604_162202218.jpg
IMG_20210604_162328833.jpg
IMG_20210604_162832508.jpg
IMG_20210604_162910524.jpg
IMG_20210604_162957533.jpg
IMG_20210604_163011312.jpg
IMG_20210604_163109276.jpg
IMG_20210604_163255415.jpg
IMG_20210604_163320195.jpg
IMG_20210604_163334757.jpg
IMG_20210604_163357835.jpg
IMG_20210604_164111029.jpg

In this step we will build the body of the Falcon. It is easy but repetitive... To attach some of the white rods, you may want to use another rod to help push them in. Also, notice for the majority of the body the white rods are attached in a spiral.

Grid Fins

IMG_20210616_073240926.jpg

As you may know, grid fins are a type of fin often used at the top of a vertical-landing rocket stage like the first stage of the falcon 9 or falcon 9 heavy. Because we are in such a small scale, 2 pieces is all we need to represent them!

Interstage

IMG_20210604_164247668.jpg
IMG_20210615_191846292.jpg
IMG_20210615_191933200.jpg
IMG_20210615_192031369.jpg
IMG_20210615_192114715.jpg
IMG_20210615_192152749.jpg

This is the interstage, the part of the rocket that holds the engine of the next stage. In this model, it isn't actually hollow, and the 2nd stage just snaps in using a grey snap connector, not hydraulics! ALSO keep in mind I made a mistake. The grid fins ARE supposed to be in these photos.

Second Stage

IMG_20210616_080837842.jpg
IMG_20210616_080851470.jpg
IMG_20210616_080937874.jpg
IMG_20210616_081016905.jpg
IMG_20210616_081131730.jpg
IMG_20210616_081154626.jpg
IMG_20210616_081239810.jpg
IMG_20210616_081300674.jpg

This is the second stage of the Falcon 9 Block 5 Rocket!

Finished!

IMG_20210616_081357199.jpg
IMG_20210616_081406070.jpg
IMG_20210616_081317800.jpg
IMG_20210616_074045417.jpg

This is your finished rocket! Make sure you check out my payloads for the rocket. Links for them are in the first step.