K'nex - Ray Gun Mark II Instructions

Hey guys and random zombie fans and yes you are not seeing things, yes that is the first ever Ray Gun Mark II to be made out of K'nex on Instructables and I have also made instructions for it so you can have your very own.

Before we go any further, I would like to thank and give a lot of credit to Instructables member The Red Book Of Westmarch as I have used his Dragunov handle, trigger and barrel structure as this is how I got the idea from so many thanks Red. The Ray Gun Mark II took me 7 hours and 10 minutes to build it and this does include making minor tweaks and adjustments to it.

Good Points

· Removable Magazine

· Good Iron Sights

· Very Realistic

· Comfortable Hand Grip (Thanks To Red)

Bad Points

· Doesn't Shoot Because It's Just A Model

· Uses Quite A Lot Of Cut Pieces (see Parts List)

In Call Of Duty: Zombies, the Ray Gun Mark II will only appears in all Call Of Duty: Black Ops II maps providing you have downloaded the Vengeance DLC where it is only available from the Mystery Box for 950 points. It fires a 3 burst round that with one shoot can kill up to 10 zombies if they are standing one behind the other. When it is Pack-A-Punched for 5000 points it becomes the "Porter's Mark II Ray Gun" where you get a bigger magazine and more ammo. The one shoot kill is still up to round 37 or even higher when it's is not PAP. Speed Cola makes the reload very swift and Vulture Aid is useful since ammo is fired in bursts, you get 1 or 2 bullets occasionally for it from zombies when they are killed. Overall this weapon is only useful if you are good at rape training.

Also check out my other creations and instructions

https://www.instructables.com/id/Knex-1975-CZ-75-Instructions/

https://www.instructables.com/id/Knex-Biplane-Instructions/

https://www.instructables.com/id/Knex-1976-MP5K-Instructions/

https://www.instructables.com/id/My-Knex-Weapons-Of-2013-2014/

https://www.instructables.com/id/Knex-James-Bond-Helicopter-With-Saws/

https://www.instructables.com/id/Knex-1979-SPAS-12-Instructions/

https://www.instructables.com/id/Knex-Galvaknuckles-Instructions/

If you have any trouble or need more pictures just leave a comment and I will get back you ASAP. I strongly advised you to collect all the pieces before you start building. Also I have added a few notes throughout this instructable to make it more easier to understand something if you run into any difficulty.

Green Rods - 211

White Rods - 81

Blue Rods - 14

Green Connectors - 19

White Connectors - 30

Blue Connectors - 22

Yellow Connectors - 63

Red Connectors - 22

Light Grey Connectors - 12

Dark Grey Connectors - 15

Orange Connectors - 11

Tan Connectors - 5

Tan Connectors (with the little tab cut off) - 5

Y Shape Black Connector - 43

Black Socket End - 4

1.9cm cut Rods - 14

4.4cm cut Rods - 5

Green Rods (cut, see step 6) - 2

Red Connector (cut. see step 2) - 1

Light Grey Connector (cut, see step 5) - 1

Orange Connector (cut, see step 2) - 3

Blue Hinge Half - 1

Black Hinge Half - 1

Blue Spacers - 15

Rubber Bands - 5

Total - 605

Well done you made it to the end, I do hope you have enjoyed building it.

Zombie Quotes About The Ray Gun Mark II

"Hey! Look at what the devil box gave me"

"Bullets or lasers? Hmm, makes no difference to me!"

"The Ray Gun Mark II?! Is that like, a sequel to the original"

Thanks for building it, please leave a comment in the box below and subscribe