Knex Plane (100% Realistic)
by teamgenez in Living > LEGO & K'NEX
1917 Views, 2 Favorites, 0 Comments
Knex Plane (100% Realistic)
A knex plane that I built. Working ailerons, elevators, flaps, motorized propellers, and retractable landing gear
The Base
Nothing like this is complete without a base
The Axle That Controls the Ailerons
The Axle That Controls The Ailerons. A few tight fits might occur here
The Body
The big part. The gray 3d connecter can be replaced by a purple one slot connecter. I just used it to conserve pieces
The Wings and the Motor
The wings and the motor that hooks up to the propellers
The Tail
The tail which has the elevators
The Landing Gear
Wheels the two that are alike have y-connecters at the bottom. Any type of wheels the size shown will work
The Chain
These are supposed to link from the motor to the propellers. Notice how one is longer than the other. One has 38 links and the other has 37
The Assembly
Putting it together. Looking at the model from behind, the longer chain has to be on the right side of the motor