K'nex Piece Launcher

In my first how to i will show you how to make a piece pusher ( sorry for ban quality taking this on my iPhone )

First you will need a yellow connector, 4 yellow rods, 1 white connector, 2 red rods, 1 purple blue connector ( will be in picture ) and 1 elastic ( small )

First you will need to connect the blue purple connector to one of your reds

Now that those are connected put the white connector like so

Now put yellow connectors like so

Clip the yellow connector two the top off the red

Attach the unused red to the opposite side of the way the yellow is pointing

Now you ready to add the elastic to to the pusher, to attach put on 2 rod spots on the purple blue connector and on the inside between the closest 2 yellow rods

Now all you have to do is find you ammo and load I personally use the white connector I will show you how to load

To load pull back the blue purple connector

Now put your ammo on the red rod like so

When you want to fire load pull back connector And releases and it will fire

Well that was a k'nex piece pusher if you have any problems leave a comment that states the problem and make a troubleshooting how to fix it you can add a scope but I didn't as well leave the arcamada and the pice pusher in the background I say.......

Byeeeeeeeeeeeeeeeeeeee shoutout for my friend