K'nex Phone Charging Stand
Once you are done this is what your new phone charging stand should look like!
Side of Stand
The side of the stand has 1 dark grey connector, 1 dark blue connector, one white connector, one green connector and one red connector. For rods it has 3 green rods and one blue rod. You will need to make two of these for both sides.
Connector Rods
The connector rods has 3 blue rods and one yellow rod.
Second Side Connection
Make sure that the connections are in the right place.
Back of Stand
Turn the red connectors on the sides so that they are touching.
Back Connection
Connect the two red connectors with a green rod. The back of the stand should bend a little bit.
Your Charger Stand Is Ready!
Just pull your charging cable through the back of the stand and plug in your phone or tablet.