Knex Noise Shaker
This is a knex noise maker that I build, and it rattles when you shake it. There are wheels in the middle that move back and forth when you shake it, thus producing a rattle sound. It is very loud if you shake it really hard.
Parts Count
Connectors:
Dark Grey - 2
Orange - 4
Green - 40
Purple 3D - 4
Blue 3D - 4
White - 5
Rods:
Green - 40
White - 20
Blue - 4
Grey - 5
Other:
Tan Clips - 4
Blue Spacer - 1
Small Wheel (See Pic 2) - 4
Big Wheel ( See Pic 2) - 4
The Top
Pic 1: Make this circle.
Pic 2: Make this rattle part.
Pic 3: Connect the rattle to the circle.
Pic 4: Add these on the top of the circle.
Pic 5: Put a white connector at the top.
Pics 6 and 7: Repeat steps 4 and 5 on the bottom.
The Handle
Pic 1: Build the handle.
Pic 2: Slide this rod through the middle of the ball.
Pics 3-5: Add the connectors that are in the pictures.
Pic 6: Put a blue spacer and a tan clip at the end of the rod.
Pic 7: Slide the handle on the bar and hold it there with a grey connector.
You Are Done!
Shake this thing and it will rattle. This will annoy some people, but not as good as my knex annoying machine.