Knex Knife With Sheath

This is my knex knife. I took NatNoBrains knex knife and sheath and modded it so it looks a lot better and so it is a little stronger.

If you like this, please vote for it in the remix contest or in the knives and blades contest.

Connectors

Dark Grey - 21

Light Grey - 5

Orange - 14

Red - 4

Green - 4

Yellow - 8

White - 2

Rods

Green - 4

White - 20

Blue - 12

Grey - 1

Other

Bendy Rod (Grey Length) - 1

Metallic Blue Clips - 2

Tan Clips - 17

Silver Spacer - 5

Blue Spacer - 6

Y Clips - 4

Pic 1: Snap 13 tan clips on a bendy rod.

Pic 2: Add 10 orange connectors between the tan clips.

Pic 3: Snap 12 grey connectors and 2 metallic blue clips onto a grey rod.

Pic 4: Connect the two parts together and add a light grey connector at the end.

Pic 1: Snap a white connector on the end of the blade.

Pic 2: Add 6 red rods to the white connector.

Pic 3: Put another white connector on the ends of the red rods.

Pic 4: Slide a silver spacer and two blue spacers onto the end of the grey rod and hold them in with a grey connector.

Pic 5: The finished knife.

Pic 1: Make two of these sides of the sheath.

Pic 2: Make these small parts.

Pic 3: Slide the small parts into one side of the sheath.

Pic 4: Slide two blue rods with tan clips at the ends in the middle of the sheath.

Pic 5: Add a few spacers on the blue rod.

Pic 6: Snap two blue rods on the end of the sheath and add a few spacers to it.

Pic 7: Slide the other side of the sheath onto the blue rods.

Pics 8 and 9: Hold the sides of the sheath by snapping a few connectors on the blue rods.

You have just made a really cool knex knife.