K'nex Knife.
![Title1 (2).png](/proxy/?url=https://content.instructables.com/FPH/DMGE/KNVR662A/FPHDMGEKNVR662A.png&filename=Title1 (2).png)
Here is a K-nex play knife i made.
Materials.
![Parts1.png](/proxy/?url=https://content.instructables.com/F5G/WWWG/KNVR661W/F5GWWWGKNVR661W.png&filename=Parts1.png)
You will need:
SITICKS:
Three whites.
one gray.
two bendy oranges.
and one curved gray.
Connectors
One white
one gray
and one yellow
(if you aren't sure of what I mean consult the picture above)
The Hilt.
![Hilt Parts1.png](/proxy/?url=https://content.instructables.com/FTS/IX53/KNVR662J/FTSIX53KNVR662J.png&filename=Hilt Parts1.png)
![Hilt Complete1.png](/proxy/?url=https://content.instructables.com/F0O/M7FR/KNVR662W/F0OM7FRKNVR662W.png&filename=Hilt Complete1.png)
Take the yellow connector and add the two bendy oranges on the 3rd and 4th slot of the connector.Then on the 2nd slot put in one white stick. On the other end of the orange sticks add the white connector. Next to the oranges on the white connector add the remaining whites.(see Picture If you aren't sure where to put the peices)
The Blade.
![Blade parts1.png](/proxy/?url=https://content.instructables.com/FCH/DT9K/KNVR665M/FCHDT9KKNVR665M.png&filename=Blade parts1.png)
![Blade Complete1.png](/proxy/?url=https://content.instructables.com/FAP/U9PQ/KNVR662X/FAPU9PQKNVR662X.png&filename=Blade Complete1.png)
Take the gray connector and add the two gray sticks (see Picture).
Attach Them Together.
![Attach1.png](/proxy/?url=https://content.instructables.com/FXA/MVEX/KNVR6630/FXAMVEXKNVR6630.png&filename=Attach1.png)
Attach the blade with the curved stick facing away from the white stick on the hilt.
How to Hold.
![Screenshot 2021-04-24 17-07-40.png](/proxy/?url=https://content.instructables.com/FYO/07K3/KNVR68CK/FYO07K3KNVR68CK.png&filename=Screenshot 2021-04-24 17-07-40.png)
Hold with your thumb facing away from the curved side of the blade.
Done!
![Title1 (2).png](/proxy/?url=https://content.instructables.com/FPH/DMGE/KNVR662A/FPHDMGEKNVR662A.png&filename=Title1 (2).png)
There you go now you have a k-nex Knife! Good Job!