Knex Knife
this is my first instructable, so it does not look very good. sorry,in advance.
Step 1: Pieces
you will need:
-connectors
- 1 green
- 2 white
- 1 yellow
- 10 orange
- 1 grey
-rods
- 2 grey
- 2 green(not bendy)
- 4 red
Step 2: the Blade
pic 1: take 8 orange connectors and 1 grey rod
pic 2: put all orange pieces on the grey rod
pic 3: take 1 green rod, 1 green connector, and the other grey rod
pic 4: add them together as shown
Step 3: Assembling the Blade
pic 1: take both sides of the blade
pic 2: assemble as shown
Step 4: the Handle
pic 1: take the last 2 orange connectors, the other green rod, and the yellow connector
pic 2: attach as so, and DO NOT attach the yellow connector
pic 3: take the 2 white connectors and the 4 red rods
pic 4: attach as shown
pic 5: take the assembled bits
pic 6: assemble as so. the orange, green and yellow are actually part of the base of the blade.
Step 5: Assembling the Knife
pic 1: take the blade & handle
pic 2: assemble as shown