K'nex John Deere "X" Series Combine Harvester
by Dextar 5000 in Living > LEGO & K'NEX
1430 Views, 1 Favorites, 0 Comments
K'nex John Deere "X" Series Combine Harvester
This combine of mine is a crazy feat of in-depth detail and engineering. A trip inside this combine would reveal just how much work went into it (just about a year worth of work if you cant tell). this thing has a working header, a hopper auger that, when you spin it in the right direction, makes the auger effect, it has a shaker pan, a fan underneath the shaker pan (not where it really would be). A thresher. A divider before the thresher that also acts as a rock stopper on the real thing. It also has the new "X" series drum: a track. It has warning lights, and also a GPS module on top of the cab. It even has a folding unloading auger. On the back it has the spreaders. It has a hopper to. Now, this thing may look like an unfinished skeleton, but that is actually what i wanted it to be. Then you can easily see all the super cool features. This thing was finished before my 14th birthday. It was just sitting in a corner until now, when I am typing this, in serious need of reassembly. which is what I plan to do right now. Have fun!
Supplies
Rods:
1. 29 green
2. 122 white
3. 64 blue
4. 66 yellow
5. 27 red
6. 15 orange locking rods
7. 10 grey
Connectors:
1. 96 pins (grey or purple)
2. 3 locking pins (peach)
3. 11 small pins (blue)
4. 39 y
5. 27 red
6. 23 green
7. 31 yellow
8. 25 white
9. 70 grey 3D
10. 12 blue 3D
Wheels:
1. 8 small with rubber
2. 2 large with rubber
3. 11 small rims
Other:
1. 5 rod caps
2. 22 blue spacers
3. 13 grey spacers
4. 3 orange angled pins
5. 1 orange k'nex dude eyes XD
Body
1. make
2. make
3. make
4. connect
5. connect
6. make
7. make 2
8. connect
9. make
10. make
11. connect
12. connect
13. make
14. make
15. make
16. connect
17. connect
18. so far
19. get
20. attach
Done body!
Spreaders
1. make
2. make
3. make
4. get
5-8 place in sequence
9. connect
10-11 attach
Shaker Pan
1. get
2. make x2
3. make
4. make x2
5. make
6. make
7. make
8. place and connect
9. place other 2
10. place
11. connect so it turns easily
12. connect
13. attach
Fan
1. get
2. make
3. place, pin goes on the bottom beneath the combine
Thresher and Rock Trap
1. make
2. make
3. make
4. get
5. connect
6. connect
7. make
8. connect
9. attach
Upper Frame and Ladder
.jpg)
1. make
2. attach
3. make
4. attach
5. make
6. attach
7. make
8. attach
9. make
10. attach
Cab
1-5 make
6-9 connect
10. attach
Series X Drum (conveyer)
1. make
2. attach
3-5 make
6. connect
7. connect
8. attach
Unloading Auger
1. make
2. make
3. close up of 2
4. connect
5. attach
6. put in holder
Hopper Augers
.jpg)
1. make
2. make
3. connect
4. make
5. connect
6. make
7. connect
8. attach
Rear Folding Warning Lights
1. make
2. attach
Hopper
1. make
2. attach
3. make
4. attach
5. make
6. attach
7. unfolded-unloading
8. folded
Straight Cut Header
Hope you can make it XD don't want to take it apart for fear of not remembering how it goes.... EDIT: If there are repeated pics, don't worry, but I took it apart and took some more pics :) they are all in random sequence, but maybe you can still build it. good luck! (you might need it)
AND YOU'VE DONE IT!!!!
Congratulations!!!! You have made the combine. That's all for now, see ya!