Knex Grenade
Gather the Parts
This may be annoying. It may fall apart ALOT! It just takes practice. I had trouble! I hope you enjoy!
Parts list:
-I yellow rod
-I dark grey oval looking thing
-I orange thing
-8 Yellow connectors
-8 Green Connectors
-2 white connectors
-18 light grey connectors (You can substitute for this piece)
-8 red connectors
Parts list:
-I yellow rod
-I dark grey oval looking thing
-I orange thing
-8 Yellow connectors
-8 Green Connectors
-2 white connectors
-18 light grey connectors (You can substitute for this piece)
-8 red connectors
Make the Pin
This will activate it if pulled
Start the Base
Start the base
Make the Center Layer
Use the yellow connectors
Insert the Pin Into the Bottom
The title says
Add the "Explosion"
Dump all the light grey connectors into the body
Make the Top Layer
Use the 8 red connectors and the 1 remaining white connector
Put All the Layers Together
Now push the top layer onto the middle layer
Secure the Pin
Now use the dark grey piece to secure the top of the pin
Your Done! Now to Set It Off
Good job! Now remove the top grey piece and then remove the pin. Now just drop for an epic explosion! Have fun!