Knex Enigma Encryption and Decryption Device

this is a enigma machine that can encrypt and decrypt easily

The gear on the side is used to spin the wheels

The pegs on the bottom are labels the white one represents the one you don’t use the numbers off of to encrypt

Or it would contain the numbers you have in the real code

I’ll make a real intractable soon

so when using a machine like this you would use a key word in this case though it is all numbers because you can’t put 26 letters on one of these

So in the video is how to program it

Also 1 gray spacer=3 blue spacers witch are the numbers in this case and the blank spot is 0 or 8

Your preference

In the vid I’m programming it to 1835

so I’m still using 1835 as program and then I’m going to encrypt 1250

Now I’ve come up with 2 ways to encrypt/d decrypt

Normal where you just go 4-3-2 and repeat I’m talking about the label’s or

Hard where you come up with a sequence so you have to know that and code and key word

decrypt is entering the encrypted code with the same program on the wheel that you originally got it from also after your done useing it just program it to 0-0-0-0 so no one can decrypt it

I’m decrypting 1250 after I encrypt it